1500L copper brewery beer brewhouse for sale

Description

1500L copper brewery beer brewhouse for sale

 

 Brief introduction of 1500L beer brewhouse:

The 1500L beer brewhouse contains lauter tun,mash/kettle tun and whirlpool tun,also configure hot liquid tank and cold water tank. It adopt  automatic spent grain removable system.It will have separate control panel to control the system.Beside that,the motor and pumps are controlled by VFD,most important,we adopt famous brand, the brand is ABB or Siemens.

  Details of brewing system

• •  3-vessels:1500l lauter tank,1500l mash/kettle tank,1500l whirlpool tun(with 2000l hot liquid tank and 2000l cold water tank)

• •  steam heating method

• •  Inner thickness:3.0mm,outer thickness:2.0mm,jacket thickness:1.5mm

• •  insulation:polyurethane,thickness:100mm

•  Useful capacity:20hL,total capacity:15hL
•  Heavy duty false botton with pillar support system
•  Fully insulated vessel
•  SS CIP High-flow rotary spray ball with 360 degree of coverage
•  Interior light
•  Sparge ring assembly
•  Top mahway(tempered glass)
•  Side manway for spent grain out
•  Gap of the sieve is 0.7mm
•  automatic spent grain removable system
• Sieve plate: The sieve plate is 20 mm above the bottom of tank. Regardless of any type of sieve plate, the opening ratio is generally 10% to 12%, and the opening width is 0.5 mm to 0.7 mm.
• Raker： Raker plays an important role in speeding up the filtration speed of wort and improving the quality of wort. In most cases, the first wort is filtered and the spent grain are squeezed together. At this point, the filtration speed is slower. Then rotate the filler to loosen the spent grains and increase the filtration speed.
• Agitator:The requirement of the agitator is:let solid particles can be suspended and evenly distributed in the liquid to avoid local overheating, causing anxious burnt and affecting the taste of the wort and the beer. The agitator adopts frequency conversion adjustment, and the speed can be flexibly adjusted according to the requirements of the mashing process
• Side manhole:It is used to remove spent grain.When the raker turn foreward,its function is a raker.When the raker turn reverse,its function is automatic spent grain removable.
• Sight glass:You can check if the wort is clean through the sight glass.