500L conical stainless steel customized fermentation tank


Beer brewing process Malt is ground in the grain mill.

The milled grains are transported with bags to mash kettle.

In the mash tun the grist is mixed with brewing water from hot water tank(to form the mash)

In the lauter tun the dissolved liquid extract (wort) is separated from the solids (spent grains)

Brewing kettle is used for boiling.

Whirlpooling is creating by circulating the wort.

The cold wort is pumped through a hose from the heat exchanger to the fermentation cellar via the brew house pump.

The wort ferments in the fermentation tank.

The green beer matures in the serving tank.

After the ageing process the beer can be served directly from this tank.

Detailed drawing:(fermentation tank)

500L conical stainless steel customized fermentation tank


  • Safe relief valve: The temperature in the tank increases during fermentation, so it is necessary to install a safety release valve.
  • Breather valve: Prevent the tank from producing negative pressure, protect the safety of fermentation tank.
  • Sampling valve:Sampling holes in the tank help the winemaker keep an eye on the fermentation.
  • Pressure gauge:The fermentation process produces a lot of carbon dioxide, so the pressure in the tank increases.The pressure gauge can be used to ensure that the pressure in the tank is within a reasonable range.
  • The temperature probe: The temperature is monitored through a thermometer, and the refrigeration system is started when the set temperature is reached.

Quality standard:
1. Construction by high quality SUS 304 food grade stainless steel, all pipes are SUS 304.
2. All tanks will be tested and detected in the NDT room after finished, to ensure no leakage.
3. All jackets will do water and pressure testing, design pressure: 3bar, working pressure: 1.5-2bar;
4. All tanks will be pressure protection 48 hours before leaving from factory;
5. All the welds are TIG full welded, dimpled jacket by using water to weld to make sure uniform to be long life.
6. All tanks are mirror polishing inside without dead corner, welds grinded to Ra 0.4um.
7. All the manholes and clamps gaskets will be sanitary.

Our factory:

Degong Equipment Technology Co., Ltd. is located in Hi-tech zone, Jinan, China.

Our factory covers an area of 3000 square meters or so and possesses more than 50 workers.


If you have any questions,please feel free to contact me.


Tel/Whatsapp:+86 15866015593

Email:[email protected]