By Brewery 0 Comments

1000L Mash Tun,Kettle,Working Platform / Heat Exchanger,Control Panel equipment

Mash Tun

  • Effective volume: 10 BBL
  • Milled plate false bottom
  • Rake motor: 2.2 Kw SEW Eurodrive Rake Motor, variable speed with reverse
  • Grain out Paddles: Integral to the rake, activate in reverse direction
  • Dedicated sanitary centrifugal pump, variable speed control
  • Glass Grant and underlet capability
  • Inner container: SUS304,thickness 3mm, 2B finished
  • Outer Shell: SU304, thickness 2mm, brushed finish
  • Insulation material: polyurethane, thickness: 80mm
  • Grain out side mandoor with removable chute
  • Vorlauf, Sparge Ring, strike water fill port
  • Oversized glass window mandoor with interior light
  • Necessary fittings and valves, pipeline, dual CIP balls

Kettle

  • Effective volume: 10 BBL. 20% headspace
  • Dedicated sanitary centrifugal pump, variable speed control
  • Inner container: SUS304,thickness 3mm, 2B finished
  • Outer shell: SU304, thickness 2mm, brushed finish
  • Insulation Material: polyurethane, thickness: 80mm / rock wool
  • Heating method: Direct fire, fully modulating Economite Midco 4400DS HTD forced air burner.
  • Oversized glass window manway with interior light
  • Steam Vent: Removable condensing steam vent
  • Necessary fittings and valves, pipeline, CIP wash ball
  • Rotatable racking arm

Working Platform / Heat Exchanger

  • Large working platform
  • All stainless steel anti slip design
  • Built in work shelf
  • Spray down hose location
  • Full handrails
  • Heat Exchanger: SU304 plate and frame 8 sq meter surface area

Control Panel

  • Centralized control panel
  • Temperature displays for all critical process
  • VFD controls for Pumps and rake
  • Burner controls
  • Lighting controls
  • Integrated circuit breakers

Utility Connections

  • Electricity: 220v 3-Phase for mash rake, wort pumps, and main control panel. 30 Amp Breaker Required.
  • Water: 1″ NPT female inlets at Brew House for hot and cold water sources.
  • Gas Pipe Size: Minimum 3/4″, larger sizes may be required due to distance from meter and pressure drop.
  • Gas pressure required: 7″ W.C (water column) minimum 14″ W.C. maximum at burner location.

Recommended Equipment (NOT INCLUDED)

  • Noritz NCC1991 Condensing Commercial Tankless Water Heater – 199,000 BTUs, and 94% efficient. Temperature output up to 185 degrees. CA Low NOx approved. Multi-unit scalability for increased flow rates.