Description
2/3vessel beer equipment brief description
Two vessels or three vessels brewhouse: mash/lauter, kettle/whirlpool, water tank
Heating method: electric heating, can also be gas heating, steam heating, etc
It can fix with hopback. Hot wort grant
The pump will be frequency control, ABB brand or other world famous brand
The heater exchanger can be single stage or double stage, inside will be SUS304 material
The operation platform can be stainless steel
The fermenter will be fixed with 4~8 fermenter, its quatity, can be flexible according to customer’s requirement. Or follow our suggestion
Carbonation device will be optional
The bright beer tank will be optional, and it can be fixed with carbonation device and sight glass for optional
With related cooling system
50L or 100L CIP cleaning system
PID control or PLC simens control
5BBL brewhouse system & bright beer tank
2/3vessel beer equipment brewhouse parameter
2-vessel: mash/lauter tank and boiling/whirlpool tank;
Combination tank: Mash lauter/whirlpool tank, boiling tank;
3/4 vessels is also available if pub brewery space and operation needed;
Hot water tank, cold water tank is optional.
Accessories
Lauter tank raker and wort pump with VFD ABB motor to adjust the speed. Laser cutting sieve plate with the gap 0.7mm and thickness is 4.0mm.
Tempered glass top manway for brewhouse.
Two stage type plate heat exchanger, stainless steel type.
Glass type sight glass to make sure wort more clear during lautering
Stainless steel 304 operation platform
temperature probe, wort pump, hot water pump, ring, cleaning ball,sight glass
side manhole & raker
ring & temperature probe & hopper
2/3vessel beer equipment fermentation parameter
- 4 stainless steel legs with leveling footpads
- Interior shell: 304 stainless steel, thickness 3.0mm
- Exterior shell: 304 stainless steel, thickness 2.0mm
- Interior and exterior finish bright polish to 0.4μm, hygiene surface
- 60 degree cone bottom, other angles can be specified during the design process
- Combined drain extensions and beer port in cone are standard
- 25% headspace, unless a different volume is requested
- Top or side manway door
- Dual zone in sidewall and cone dimple cooling jacket with glycol inlet and outlet
- Polyurethane insulation thickness 80mm for cooling jacket on side and bottom
- Fully welded exterior shell
- Non welding CIP arm and rotating 360 degree reach spray ball
- Ice water solenoid valve, pressure relief valve (safe valve) are standard
- Pressure gauge, Temperature probe,Sanitary sample valve,mechanical regulator valve,raking arm and port
- Tank complete with piping, fittings, sanitary valves and all parts.
- Carbonation port is available for special request (stone not included)
- Dry hop ports and/or hop bag hooks in any fermenter of any size for special request
If you are interested in beer equipment, get in touch with me freely.